| Factories Act 1948 topic | What it means for plant training | Source named in the post |
|---|---|---|
| Status of the Act | Repealed from the date the OSH Code's commencement was notified; the Ministry of Labour and Employment appointed 21 November 2025 in notification S.O. 5321(E) | OSH Code section 143 |
| Old rules | Rules made under the old Act stay in force until the Central Government repeals them, so far as they do not conflict with the Code | OSH Code |
| Employer training duty | Provide information, instruction, training and supervision necessary for employees' health and safety, as section 7A(2)(c) of the old Act did | OSH Code section 6(2)(c) |
| Drills and first aid | Quarterly mock drills in every factory, and first-aid training refreshed every three years | OSH Code Central Rules, rules 59 and 54 |
| Safety officers | Factories above a set worker count, with a lower threshold for hazardous processes, must appoint safety officers | OSH Code section 22(2) |
| Recording training | No single prescribed register was found for general worker safety training, so state rules and your safety officer set the format; log drills and first aid separately | The post's reading of the Code and Central Rules |
The Factories Act, 1948 was repealed when the OSH Code, 2020 came into force on 21 November 2025 (PIB), so Indian plants now work under the Code, its rules and any surviving state rules. The Act's safety sections still map what plant teams should cover: machine safety, fire routines, hazard information, first aid and emergency drills.
Last reviewed: 13 November 2026. This is training guidance, not legal advice: your factory's safety officer or counsel must confirm which rules apply in your state.
Factory safety training: the instruction, practice and sign-off that tells each person in a plant which hazards they face, what they must do and what they must report, with a record that shows it happened.
Is the Factories Act, 1948 Still in Force for Indian Plants?
No. Section 143 of the OSH Code repeals the Factories Act, 1948 from the date the Code's commencement notification is issued, and rules made under the old Act stay in force until the Central Government repeals them, so far as they don't conflict with the Code (OSH Code). The Ministry of Labour and Employment appointed 21 November 2025 as that date in notification S.O. 5321(E). On 8 May 2026 it notified the OSH Code's Central Rules, G.S.R. 345(E), which include rules for factories (Central Rules). We read all three texts on 13 November 2026.
What Did the Factories Act, 1948 Require on Worker Safety Training?
Six provisions in the Act text on labour.gov.in tie directly to training (Factories Act). They remain a useful checklist for what a plant's training should show.
| Section | What it asked for | Training touchpoint |
|---|---|---|
| 7A(2)(c) | Information, instruction, training and supervision to keep workers safe | Induction and on-the-job instruction |
| 22 | Moving machinery examined or adjusted only by a specially trained worker | Machine authorisation and a register |
| 23 | Young persons instructed on a machine's dangers, then trained or supervised | Machine instruction before any task |
| 38(2) | Workers familiar with fire escape routes and trained in the routine | Evacuation briefing and drills |
| 41B(4) | Emergency plan for hazardous processes made known to workers | Emergency-plan briefing |
| 111A | Workers' right to be trained in the factory or at an approved centre | Access to training for every worker |
Where Do These Training Duties Sit Under the OSH Code?
The training duty carried over, and the Central Rules add specific frequencies for plants. The list is a summary; read the texts with your safety officer.
- Employer duty: factory employers must provide information, instruction, training and supervision necessary for employees' health and safety (section 6(2)(c) of the OSH Code).
- Worker duties and rights: employees must report unsafe situations (section 13) and may raise imminent danger with the employer and the Inspector-cum-Facilitator (section 14).
- Safety people: factories with 500 or more workers, or 250 or more in hazardous processes, must appoint safety officers (section 22(2)).
- Drills and first aid: the Central Rules require quarterly mock drills in every factory (rule 59) and first-aid training for at least 33 percent of workers, refreshed every three years (rule 54) (Central Rules).
- Hazard-specific training: workers who handle waste and effluents must be trained on its hazards (rule 48), and in factories that humidify the air, staff exposed to extreme heat and humidity must be trained to recognise heat stress (rule 25).
What Should a Plant Training Plan Cover for Production Workers?
Start from the plant's own hazard list, then give each group its own module. Treat this as a design model, not a legal minimum.
- Every worker: hazards in the work area, how to report an unsafe situation, the fire escape routine and the site's first-aid arrangements.
- Machine operators and maintenance staff: the machine's specific hazards and the isolation steps in your own SOP, with supervisor authorisation before solo work.
- Hazardous-process teams: hazard information, the emergency plan and the warning-of-danger route.
- Supervisors: how to observe, correct and sign off, and when to stop a job.
Our guides to the induction of shift and factory workers and to a safety induction for new joiners cover the first week in more detail.
How Should an Indian Factory Record Safety Training?
Record what a safety officer or inspector would ask for: who was trained, when, on which topic and SOP version, by whom and in which language, how understanding was checked, and who signed it off. Add the date the refresher falls due. Hypothetical entry: "Press line 3, worker ID 1042, isolation steps (SOP v2), Hindi, observed performing all steps, signed by the shift supervisor, refresher due in twelve months."
We found no single prescribed register for general worker safety training in the Code or Central Rules, so state rules and your safety officer set the format. The mock drill and first-aid frequencies above are the fixed points, so log those separately. Plants with multilingual shifts should record the language used: the Central Rules ask welfare officers to explain policies to workers in a language they understand (rule 57 of the Central Rules).
Where Does Probbit Fit?
Probbit produces safety, EHS and SOP training videos: short lessons built from your approved procedures, in the languages your shifts use, with review and sign-off by your safety officer or nominated experts. Exact equipment demonstrations need real footage and qualified review, and video doesn't replace floor demonstrations or supervisor sign-off. Delivery timing depends on approved source material, scope, languages and review rounds. To plan a plant training library, schedule a call.
